Now add full size boards to the side panels. I plan to add labels to the drawer pulls once I start adding supplies to the cabinet. In order to make the cabinet look like two separate pieces, you will want to add some additional wood and trim to the bottom half of the cabinet. You will also need leg mounting plates to attach the feet. Center the mounting plates over the drilled hole and attached with included screws. Maybe you`d like a small square section of a drawer where you can keep screws or nails while you work. Use wood screws that are 1 inch long to attach your hardware and your wooden drawer fronts, securing them firmly to the door insert. I used label holder pulls for my hardware. The screw goes in from the front on these label holder pulls from D. Lawless Hardware, making them perfect for this project.



















Then screw the wooden feet into place. It is necessary to drill a hole the size of the screw attached to the wooden foot. Now you will want to drill two pilot holes in each drawer front with a small drill bit. This is a multi-functional piece of furniture your kids will totally adore. I love how they have managed to build everything together in this piece of furniture. At this point I have decided to make the existing cabinet look like it’s two separate pieces. For instance, separate your green tea, oolong tea, Darjeeling tea, and other tea leaves so you can easily sort and use the tea leaves you want. If you want to do more, negotiate with the landlord and make sure all exceptions are indicated in your lease. These are stained with Old Masters American Walnut Stain. I used French Linen for the bottom half and Old White for the top half.



















Once the stain has dried, then paint each square to match the top half of your cabinet. I only used one coat of paint because I wanted to allow the stain to show through. In order to achieve a distressed look for the Apothecary Cabinet Drawers, you will want to stain each square with a dark gel stain. By purchasing two 2X4 sheets of 1/4″ plywood you will have enough wood to create the illusion of small drawers. Because we already some of the door inserts for this piece, we choose to purchase more to create our drawers. I also plan to rip out the two built in cupboards and replace them with organised shelves instead of chaos drawers or useless space. You want to be sure you space the wooden drawer fronts evenly tool chest on wheels the door insert. This is useful when you want to carve into thick sheets of foam or when you want to have a very snug fit for you tools. Although it is more time consuming, you can use a sanding block or sand paper if you don’t have a belt sander. Then use a belt sander to smooth the edges.



















Learn from this tutorial how to use chalk paint. You can cut this circle with a knife, but it`s even easier to do so with a hole punch (the metal kind you would use to cut perfect circles in plastic, leather, wood, and other materials). Decide where you want your hardware placement and punch a hole in the paper template to mark for your pilot holes. You can purchase new boards or trim work from the hardware store. We striped the boards using a table saw to create the trim pieces. We used a table saw to strip the plywood into the appropriate size. The space offers an array of ideas worth considering for your bath, whatever its size. Owing to its big size and various deep drawers, the unit can hold up to hundreds of KGs weight. Closets can hold lots of equipment and supplies, especially if you have a strategy for outfitting them to take advantage of every inch. That means you have to actually strike a roach with the liquid to kill them. So have a family meeting to make escape plans, and consider all the ramifications of each.